Our products
WaterKit
Cold water supply systems
AgriKit
Irrigation systems
GasKit
Gas supply
KompactKit
External sewerage
DrainKit
Drainage systems
StockKit
Liquid storage
SpringKit
Pipes for water wells
netLINE
Fiber optic network protection
AquaClean
Wastewater treatment
AquaPur
Purification and filtration of drinking water
EasyKit
Internal sewerage
SafeKit
Internal sewerage HDPE
PexKit
Warm floor
SolarKit
Alternative heating system
AlpexKIT
Heating and plumbing system Alpex
RandomKIT
PP-R pipes and fittings
SaniKIT
Plumbing
PluviKIT
Drainage systems
Description
GasKIT catalog

GasKIT is a complete system for the supply of gas, pipelines and fittings based on high density polyethylene (HDPE). The system consists of HDPE pipes and fittings, fittings for electric welding, valves for gas and welding equipment.

PEHD distribution systems with fittings

Joining butt welding is the most popular welding method, as a result of the combination safely and quickly, there is no need to introduce additional materials.
It is possible to carry out welding of all diameters from 32 to 315 mm, joints and fittings are steady against draft.

Combining electric sleeve is a method used to achieve spot welding, machining or additional wiring repair.
It can be welded pipes with a diameter of 40 to 315 mm, the sleeve is removable and tensile strength.

A combination of expansion sleeve (expander) is a method used to achieve communication, each floor, rainwater discharge columns, can be installed both inside and outside the building.
This sleeve can be used for diameters from 32 to 315 mm, is removable and can be removed from the factory, through the rods.

Connection by means of connections with a carving and a fixing ring is used for creation of connections between prefabricated components, especially in the cases demanding fast dismantling of pipelines or other components.
The joints are used for diameters from 40 to 110 mm, has been dismantled and the plant can be removed by traction.

Flange connection can be used to achieve a removable centralization system in industrial plants.
The flanges are made of a special aluminum alloy, with epoxy powder, salt-resistant mist.
This type of connection can be used for sizes ranging from 50 to 315 mm, is removable and tensile strength.

The combination of thermal reduction can be used to connect a wide range of irregular or special materials with a diameter of 50 to 125 mm.
This makes the rigid connection removable but not pressure resistant.